EVA hot melt adhesive film characteristics

With the increasing demand for viscose products, omental hot melt adhesive will also enter the public line of sight. The EVA hot melt adhesive film as a hot melt adhesive film, due to ease of operation, pressing time is extremely short, only 6-10s, in non-woven, wood, leather, PET, paper and other areas of bonding Applied, the following we will introduce the characteristics of this hot melt adhesive tape.

1.Biodegradable: Will not cause harm to the environment if discarded or combusted.

2.Similar price with PVC: EVA is more expensive than toxic PVC, but more environmentally friendly.

3 lighter weight: EVA density ranged from 0.91 to 0.93, while PVC was 1.32.

4. Odorless: EVA does not contain ammonia or other organic odors.

5. Does not contain heavy metals: in line with the relevant international toys ordinance (EN-71 Part 3 and ASTM-F963).

6. Phthalate-free: Suitable for children's toys and plasticizers will not produce dangerous release.

7. High transparent, soft and toughness: a very wide range of applications.

8. Super low temperature (-70C): suitable for icing environment

9. Resistant to water, salt and other substances: in most applications can maintain a fixed set.

10 high heat paste: can be firmly affixed to nylon, polyester, canvas and other cloth.

11. Low fit temperature: can speed up the production speed.

12.Screenable and offset printing: can be used for more fancy products (but must use EVA type ink).

Suzhou Huiyang as a professional production of hot melt adhesive film company, more understanding of their products at the same time, more eager to explain to users on the hot melt adhesive film questions, please contact us: +86 400-998-2988